I've got a whole lot of junk that I need to get rid of so I can finally
finish my eblade project...lets get started...all prices are negotiable,
especially for anything on the wanted list at the end

1 BE Rainmaker #496 has been converted to take a cocker shroud and pick a
barrel between none, 03 stock cocker, and dye excel. also running 9v
batteries with a regulator....$150

1 lightning bolt for a rainmaker...never used or removed from it's
packaging...the local shop owner gave me a good deal on a load of parts
since I'm the only RM owner in the area and this is all that's left...add it
to the gun if you want...$25

1 autococker circa 1996...~37k serial # right hand feed in nearly all stock
setup...the RAM is a later stock model, but nearly as old...purple trigger
shoe is about the only part that's been added...mix and match with the parts
on down the list if you want...additional fees would apply ofcourse...pick a
barrel between none, 03 stock cocker, and dye excel...$120

1 PPS Stroker # 442...converted from a pirhanna LB or P68SC I believe...~13
barrel...pretty much all stock...rock reg converted to adjustable (drilled
and tapped to rock knob specs, hex screw in place right now)...includes a
very tight fitting elbow...trigger guard removed to allow 2 finger brass
trigger...ram is brand new this year...so new that it's still just a little
stiff and needs to be broken in a bit to get it super smooth on the
action...$250

1 Rapide pistol, with original box if I can still find it...in great
condition...$65

and now the parts...

cocker parts:
stock 3 way
stock reg
beavertail
hinge trigger frame & trigger
WGP stock 45 grips
Dye Excel barrel
stock 03 barrel
threaded timing rod
ram needing a seal (free throw in for any other order)
severely worn venturi bolt...black, light weight, with a decent groove from
a harsh detent (add for $2 to another order)

other:
1 lightning bolt, unopened for Rainmaker
2 slide check valves...1 brass ANS, takes standard barrel o-rings...1 chrome
with no rings of some odd size (can find at hardware store, but not usually
at paintabll shop)
1 slinki remote hose
1 134CI 3kpsi nitroduck "featherweight" tank...this is a big old badass tank
with a current hyrdo date, and an awesome reg $100

What I want...
cocker fang style detent or any detent that's not a piece of cram that's
gonna jam up on me like my stock one did today (little pissed about that
one)

Qloader pods (want 3 ideally)

aftermarket cocker body, micrococker or other 1/2block style by far
preffered will consider blemished or beaten bodies if pics are included with
careful description (need for project)

angel threaded feed necks...preferably very low rise (make the Qloader
happy)

I think that's about it...

shipping and payment options pretty standard, UPS or USPS...paypal
additional cost and money order preferred...

pics available and I'll try to post a reply to this later for a PBNation ad
when I get some pics...

Ken

WGP hinge? ver 1 or 2? chrome or black ?
send me pic and price if you can
RD
"Cybershark" <cybershark302@hotmail.com> wrote in message
news:ruydna7YrIMbIKrcRVn-iA@comcast.com...
> I've got a whole lot of junk that I need to get rid of so I can finally
> finish my eblade project...lets get started...all prices are negotiable,
> especially for anything on the wanted list at the end
>
> 1 BE Rainmaker #496 has been converted to take a cocker shroud and pick a
> barrel between none, 03 stock cocker, and dye excel. also running 9v
> batteries with a regulator....$150
>
> 1 lightning bolt for a rainmaker...never used or removed from it's
> packaging...the local shop owner gave me a good deal on a load of parts
> since I'm the only RM owner in the area and this is all that's left...add
it
> to the gun if you want...$25
>
> 1 autococker circa 1996...~37k serial # right hand feed in nearly all
stock
> setup...the RAM is a later stock model, but nearly as old...purple trigger
> shoe is about the only part that's been added...mix and match with the
parts
> on down the list if you want...additional fees would apply ofcourse...pick
a
> barrel between none, 03 stock cocker, and dye excel...$120
>
> 1 PPS Stroker # 442...converted from a pirhanna LB or P68SC I
believe...~13
> barrel...pretty much all stock...rock reg converted to adjustable (drilled
> and tapped to rock knob specs, hex screw in place right now)...includes a
> very tight fitting elbow...trigger guard removed to allow 2 finger brass
> trigger...ram is brand new this year...so new that it's still just a
little
> stiff and needs to be broken in a bit to get it super smooth on the
> action...$250
>
> 1 Rapide pistol, with original box if I can still find it...in great
> condition...$65
>
> and now the parts...
>
> cocker parts:
> stock 3 way
> stock reg
> beavertail
> hinge trigger frame & trigger
> WGP stock 45 grips
> Dye Excel barrel
> stock 03 barrel
> threaded timing rod
> ram needing a seal (free throw in for any other order)
> severely worn venturi bolt...black, light weight, with a decent groove
from
> a harsh detent (add for $2 to another order)
>
> other:
> 1 lightning bolt, unopened for Rainmaker
> 2 slide check valves...1 brass ANS, takes standard barrel o-rings...1
chrome
> with no rings of some odd size (can find at hardware store, but not
usually
> at paintabll shop)
> 1 slinki remote hose
> 1 134CI 3kpsi nitroduck "featherweight" tank...this is a big old badass
tank
> with a current hyrdo date, and an awesome reg $100
>
> What I want...
> cocker fang style detent or any detent that's not a piece of cram that's
> gonna jam up on me like my stock one did today (little pissed about that
> one)
>
> Qloader pods (want 3 ideally)
>
> aftermarket cocker body, micrococker or other 1/2block style by far
> preffered will consider blemished or beaten bodies if pics are included
with
> careful description (need for project)
>
> angel threaded feed necks...preferably very low rise (make the Qloader
> happy)
>
> I think that's about it...
>
> shipping and payment options pretty standard, UPS or USPS...paypal
> additional cost and money order preferred...
>
> pics available and I'll try to post a reply to this later for a PBNation
ad
> when I get some pics...
>
> Ken
>
>