Can anyone provide information on how to properly set the trigger pull on a DM4?
Mine, for some reason, seems to be rigid.

Thanks!

You can try cutting some of the spring if you feel that the pull is a little too stiff. Maybe 2-3 coils. What is your pull length?

I have even heard that replacing the trigger spring with a spring form any pen will work as well because they are a much softer.

ok heres how i set my triggers ,you aint gotta do it this way but you can ,first of all i get rid of the spring no need for it next i adjust the set screw so its pushing the micro switch in and the gun wont fire then you back the set screw out about 1/2 to 3/4 turn and with mine i set it to have a good bit of back play ,mine are so sensitive that just running to my bunker my gun will shoot the whole way and it doesnt bounce either its just really sensitive especially w/ our delrin trigger in it

yeah everyone around here just takes th espring out an runs of the switch. i herd it can wear down your switch but its not hard to replace it

ok ive never taken apart a dm4 but let me get this straight the trigger has a spring (like 2k2 angels) instead of a magnet. but it has set screws??? how does that work

Set screws alter pull length by acting as stops. Altering the length of the screws moves the activation point and forward and back travel.