i have a problem with my DM5 and here it goes....

ok when i turn it on and try to shoot, it will shoot the first ball, like really

really slow, it will like lob it out, and then after that first shot, it will shoot

another ball, at regular FPS, then the bolt will just cycle and no balls will

come out, they will just all cram in the barrel, then once i turn it on to RAMP

and RAMP on the highest setting(25bps**i think**) it will shoot em all out

then chop like crazy, i just dont get it, the bolt cycles but no ball will come

out till i RAMP any one know why this happens?? please let me know

thanks

sounds like ur bolts sticking and ur getting fsdo. id say relube ur entire gun

Try relubing your bolt, make sure your battery is full and make sure there isn't anything in your hyper 2 reg that would cause inconsistent FPS.

Ya Also take out and check your LPR. Dye is known for leaving some metal shavings in an air-port that can restrict the air flow.

Re-lube the bolt, and check for any cut, dirty, and damages o-rings and replace them. If the problem still stays, take an allen and push the bolt forward to give it sort of a "kick start" and if it STILL has the problem...

Check the ASA make sure ur not burying the on/off knob!!!!

Check the Hyper2 make sure all is how it should be

Change the battery

Sounds mainly like a broken o-ring or sticky bolt

tell me how it works bro