I have done a new trigger mod on the wrath that will almost completely eliminate the click of the trigger switch. This mod is a more advanced mod, and requires that you know how to completely disassemble your wrath.

*WARNING: By doing this modification, I am in no way responsible for any damage that you do to your gun or any part of your gun.*

Before I start let me tell you that you should do the magnet mod, as the switch will not have the power to return the trigger anymore.

To start off, you need to completely disassemble your wrath trigger frame, and take out the microswitch by taping the retaining pins out. You need to hit the pis on the side that does NOT have the LCD.

hit from this side:


When you remove the switch, you will have to lift the tabs that hole the green and white pieces of the switch together. I used a thumb tack, but I'm sure you can come across something that is thin enough to be able to disassemble the switch.



Once you open the switch, you will see a piece of lightweight metal. This is the part that acts like a spring in the trigger switch. In order to lighten your switch, you will want to bend the part of the metal that is what causes the piece to return as the trigger is replaced.




Explaining this may be a little confusing, but try to stay with me.

The part of the spring-like piece of metal that swoops down like a "u" is the part that you are going to be modding. The spring like piece of metal is connected to two leads of the switch, one that the springy part attaches to and one that the piece of metal pivots on. What you want to do in order to lighten the switch is to very slightly pinch the two parts of the "u" together. I found that the most effective way to do this without pinching the metal too much was to press down on the bottom of the "u" with a thumbtack. Every time you adjust the weight of the spring, you can check it by clicking the switch. You will know that you have gone too far when there is no click at all.

Remember that the click will be extremely lightened when you reassemble your gun because you will have two levers that lighten the weight as well.

Once you get the switch to the desired weight, Reassemble the gun and admire how your switch is barely noticable.

__________________
Wrath Rage - Devils Division- (((tera-notics)))

Team Xinity

Help our team By purchasing paintball gear from OrderPaintball.com