How to Adjust FPS on Wrath.

to initially set the lpr pressure, screw the lpr all the way out. Then set the hpr to 200-250psi. Turn the lpr a half turn, then shoot over a chrono, half turn, shoot, keep doing this until you get it at 280fps. Once at 280fps, the lpr is set correctly, and any further velocity adjustments should be done with the hpr.

For the delrin ram, the HPR should be running at 400psi, then do the same procedure as above to dial in the lpr. I think i heard somewhere that the lpr is actually set lower with the delrin ram, but im not sure. Hope this helps.

__________________
Wrath Rage - Devils Division- (((tera-notics)))

Team Xinity

Help our team By purchasing paintball gear from OrderPaintball.com