YOUR ONE STOP THREAD FOR THE DIABLO WRATH

WORTHY WRATH VIDS:
http://www.putfile.com/media.php?n=Wrath2 Posted by CombatSkin
http://www.liquidthinker.net/Theman.../pbrockstar.wmv Posted by the No Regard Team

DIABLO WRATH FAQ:
-Autococker Threads
-.693 Bore Stock Barrel
-Electropneumatic Air Ram Operation (spring return)
-Break Beam Eyes
-Odyssey/Dragun/Spyder Feedneck
-Built in QEV (DO NOT ADD ANOTHER ONE)
-Dual rubber detents
-VERY good stock HP regulator (+/- 4 fps AFTER broken in)
-25g Trigger Switch
-Stock ASA has non-standard dovetail mount (This means if you want to add a drop forward, you'll need to buy a drop, an on/off ASA and a macroline kit)
-Autococker Vertical ASA Compatable.
-2 Versions sold so far; 1st generation (Silver Jewels) and 2nd generation (Diablo Jewels)
-Dragun T1 valve compatable.*Not yet confirmed
-An HP tank is reccomended for the Wrath, though LP will work.
-Weighs in (without barrel) at 2lbs 11.8oz


JOIN THE LEGION!:
http://www.pbnation.com/showthread....threadid=990765
Chat with Forum members in real time:
http://www.pbnation.com/showthread....30#post13166330

HOW DOES A WRATH WORK?
http://www.pbnation.com/showthread....threadid=958351

WRATH MANUAL:
http://www.paintballsolutions.com/0...anual_wrath.pdf

MAINSCREEN EXPLANATION/TUTORIAL
http://www.pbnation.com/showthread....threadid=974105

Diablo Contact: ChrisValente@NationalPaintball.com

DISSASEMBLED PICS FOR REFERENCE:
http://www.pbnation.com/showthread....threadid=831035
http://www.liquidthinker.net/Theman/Wrath/

PART DIAGRAM AND LIST!!! Special thanks to jjdustr340
http://www.pbnation.com/showthread....hreadid=1066811

FACTORY RELACEMENT PARTS:
http://www.888paintball.com/888brow...ABLO&scid=WRATH

HPR TEST GRAPH:
Use this for reference on recharge rates/performance of aftermarket high pressure regulators. The Stock Wrath HPR is based off of the AA Vigilante design (as is the Bob Long Torpedo). The "Mystery Reg" is the AKALMP 2 Liter.
http://haveblue.org/dyno/5jun04dyno.jpg


CURRENT UPGRADES & MODS:

Custom Anodizing:
www.precisionpb.com They ano an entire marker for $60 or a per-peice price of $7.50 and do GREAT work. They also do color matching, so send in a paint chip or color sample and get great results.

Wrath Aftermarket Parts:
Alamo City Paintball: www.alamocitypb.com
Bolts, Cup Seals, Bolt Pins, more soon

FBM Delrin Wrath Triggers:
www.fbmfactory.com

Trigger Mod:
http://www.pbnation.com/showthread....t=&pagenumber=1

Trigger Switch Mods:
http://www.pbnation.com/showthread....threadid=856551
http://www.pbnation.com/showthread....hreadid=1022251

Trigger Guard Mod:
http://www.pbnation.com/showthread....threadid=894727

Aftermarket LPR Adapter:
The Wrath and O3 share many parts, and the LPR adapter is one of them, so if you have the mind to put on an aftermarket LPR, pick up the Zenitram O3 LPR adapter for $15 and an Autococker compatable LPR.
http://www.zenitram-mfg.com/ (Odyssey Upgrades>O3 LPR adapter)

Delrin Bolts:
http://zoompaintball.com/ (Sells BLACK delrin bolts)
http://www.pbnation.com/showthread....threadid=846394
www.spudnukl.com

PROS: Self-lubrication. Roughly 27 grams.

Nylatron Bolts:
http://www.pbnation.com/showthread....threadid=896352

PROS: Self-lubrication. Roughly 25 grams.

TFE Teflon Bolts:
www.spudnukl.com

PROS: Self-lubrication. Roughly 50 grams.

Wrath T-board:
http://www.scenariodreams.com
http://www.pbnation.com/showthread....threadid=855370

Custom Triggers:
Do a search for pbnation users: Comcast and THE BETTERONE

Air Ram Mod:
http://www.pbnation.com/showthread....threadid=864525

Autococker Vertical ASAs:
https://secure1.nexternal.com/share...ount2=979987740
(Scroll down- Straight and 15* ASAs with or without gauge ports)

Full Auto Mod: *Caution*
Above the top switch on the main board are two prongs. Placing a jumper on these will enable full auto mode. -Thanks to reddragun5 for supplying this info. More Here:
http://www.pbnation.com/showthread....ghlight=%2Bauto
WARNING- This mod may cause damage to your board if not done properly!

LCD to LED Mod:
http://www.pbnation.com/showthread....hreadid=1057378

Rubber Grip Mod:
Stock grips look shoddy? Rit Dye them! Takes a couple of hours (depending on the color and darkness you want) in hot (near boiling) water/dye. If you want your LCD screen area to remain clear, be sure to mask it off with hot glue etc. on BOTH SIDES. If you need a tutorial on dye, go here:
http://www.pbnation.com/showthread....threadid=452598


ABOVE: Dyed grips and a dyed Halo lid

Wrath Grip Discussion:
http://www.pbnation.com/showthread....threadid=879998

Intimidator Detent Mod:
http://www.pbnation.com/showthread....threadid=901890
Look for the post by squints88
*Also look at the bottom of page 6 of this thread for pics.



CPS and Operating Pressure:

1. CPS can be increased by installing the ACP delrin ram and increasing the OP to around 400 PSI. This will reduce kick as well and as far as I can tell, has minimal effect on shot count per tank fill. Adding a delrin pin and a delrin or nylatron bolt will further increase CPS (and operating pressure).
2. If you are a LP zealot and would rather have a Wrath that operates at the lowest possible pressure above all else, then getting a custom steel ram made plus buying a Spudnuk'l TFE Teflon bolt (same weight as the stock bolt, but has self lubricating properties) will be a good start. This is because the MORE MASS you have moving in the tube, the lower your pressure will need to be, however CPS may suffer using the stock spring.
3. So here is the equation in a nutshell: MP=C M is mass, P is pressure and C is cyles per second. In this simple equation you can see that mass and pressure are inversely related assuming that C remains constant. Increase the values of M and P (according to the suggestion in #1) and you increase C, subsequently, decrease the values of M and P and you decrease C (not advisable). However, increase M and you may decrease P (according to the suggestion in #2) to obtain roughly the same C (probably a little lower due to the fact that exact values are not known or taken into account). Don't worry about having to do any complicated math here, though it certainly COULD be applied if you're really OCD and would most likely result in more precise and predictable performance...

This oversimplified guide is not to be taken without a grain of salt due to its, well, oversimplified nature. If you have any questions or think something needs to be added for further clarity, just PM me. Thanks.

Special thanks to ACP for supplying a delrin ram for testing

__________________
Wrath Rage - Devils Division- (((tera-notics)))

Team Xinity

Help our team By purchasing paintball gear from OrderPaintball.com