1. Q: Are black delrin bolts bad for eblade eyes?
A: No, a black one will work just as good as a white one, no matter what. Studies have been conducted, experiments and theroies exist, black and white delrin work exactly the same.

2. Q: Whats the difference bewteen A Worrblade and EBlade.
A: The WorrBlade comes with a delrin bolt and a hammer with a lug. It has a double finger style trigger and the frame has got a built in dove tail mount. The trigger guard is slightly different and offer bigger space for your fingers. The electronics and internals are the exact same and you get the very same eblade manual supplied with both. The eblade also has a double trigger however in the blade- or flat, style. Planet Eclipse also released the new samuri trigger which is thinner and lighter.

3. Q: Whats the advantages of a delrin/nylatron bolt, light pump arm and rear block. And a smooth ram?
A: The difference is weight. The lighter the bolt, pump arm and rear block the faster the gun can cycle. Really you don't need a super-light gun for speed because it will cycle quite quickly. However it is strongly recomended that you put a delrin/nylatron bolt on there, and yes sometimes cycle rates will be affected. Also, cocking pressure could be lowered with lighter externals. Now for the ram. Most high end rams on the market today will get your cocker to high rates of fire, among the list are palmers, belsales 44. magnum, freeflow's custom SMC, kapp fat ram, shocktech, and vantrepes custom SMC. The main things to look for in a ram are a smooth stroke, a lower operating pressure, and higher cycling rate. Smoother stroke is obtained by having a well polished internal bore, a lower operating pressure is acheived by having a larger internal diameter, and the higher cycling rate is achieved by a combination of the aforementioned and how well the orings seal inside the ram.

4. Q: What are QEVs?
A: QEV's stand for Quick Exaust Valves. You usually buy a pair and add them onto your ram. They go on both ends. What they do is release the used air thats used to **** your gun back. This way the exhaust air isn't forced back through the solenoid to be exhausted. This raises your cps (cycles per second) and gives you better air efficiency. For a picture of a QEV click the link, http://www.clippard.com/images/prod...tures/MEV-2.jpg
For more information: http://home.kc.rr.com/theelectrician/ (From The Electrician)

5. Q: My eye isn't working on my eblade!
A: Usually this is caused by dirt and debris on the eye. Use a cotton swab (Q-Tip) and clean it off. It is also possible that your wire is disconnected or it is pinched. Make sure it isn't pinched by taking the gripframe off. To see if it is disconnected, take the right side of the grips off and check if the gray wire is connected to one of the slots on the top left of the board. Replacement eyes can be found at planet eclipse http://www.planeteclipse.com .If it still doesn't work try cleaning the BACK of the eye. paint or dirt on the back will cause the eye to short and read incorrectly. You can try to take out the eye and boil the tip of the eye in water for a couple of mins to clear any paint from the front and back of the eye.

6. Q: Whats the best e-cocker?
A: Preference, Preference, Preference. There is no best, but some are better than others, some of the nicer models out on the market today are Freeflows, Orracles, Eclipse, Race Half-Blocks, Works, and Evolution.

7. Q: Is there a 90*/Space frame for the eblade?
A: Evolve released a prototype but nothing ever happened with that.

8. Q: Anyone want to trade/buy my gun? Anyone want to sell me their gun?
A: No; No.

9. Q: My delrin bolt swelled?
A: Heat will cause your delrin bolt to swell. Paintball gun oil however will not cause delrin to swell, the reason being is delrin absorbs *water*, since there is room in the polymer, chemically, for a water molecule. Paintball gun oil isnt chemically like water, and delrin obviously isn't porous, ergo, little to no absorption of oil. Taken from Doc Nickles website.

10. Q: Where can I get those cool pnuematic covers naughty dogs use?
A: E-mail doggygear@hotmail.com

11. Q: I want to make a kick *** electro, what should I use?
A: Well first you need to look for certain things in certain parts. Some parts have better air effieincy, some have better speed, but you always want to read your manuals, and see what's recommended. When choosing parts, always look at weight. Weight is a big issue; lighter moving parts usually mean it can cycle faster, and use a bit less air. When choosing a LPR, look for one that can cycle fast, maintain a good pressure, reliable, and easily adjustable. When choosing a ram, look for one with a light, smooth pull. A good ram is one that you can blow very lightly and ram shoots back or forward. Now you are going to want to get a delrin bolt. Delrin is a light material, and will hold up. You never want to use a bolt that isn't delrin or nylatron. Delrin has many advantages, the main being that its puts a lot less wear on your breech, lighter - therefore faster, and creates a secure fit without blowback (Most of the time). Internals. You generally need a heavier hammer, some have set screws on the side, so the lug doesn't wander off. For most E-Cockers, you need a flat polished lug. For the springs, you need to tinker with them yourself, Maddman and Nelson springs are probably the two best. You either want a valve that will cycle fast, or will produce A+ air efficiency... Inline reg, you want something that recharges fast, reliable, and maintains a good pressure, also with a tourney lock. Now for the hoppers. The gun will fire as fast as the gun will feed it, so the faster you can cyle the gun the faster the hopper your going to need, the Halo B is the fastest in mass production now, the Evolution 2 is far behind it (they claim some outrageous feedrate which I've never seen one hit before), the 12 volt Revolutions bring up the rear. Q-Loaders are the fastest on the market, but are so cumbersome and impractical that they aren't very good.

12. Q: My EBlade Cover Broke!
A: Planet Eclipse Planet sells them for 40 USD. Online Store> Manufacturer> Eclipse. Scroll down, they have the black one and the 2nd one under that is nickel plated (chrome) without a picture.

13. Q: Any new grips for the E-Blade, or a Trigger?
A: Yes. The Samuri trigger is a smaller version of the stock trigger, retails for $30. As for the grips, you can buy soft gel pannel grips.

__________________
WildPb
Dye Precision
Bob Long
Chronic
Velocity Paintbal
RIP CJ You Will Never Be Forgotten