Thats what it says
Post up some of your favorite Spyder Mods by listing
1. Mod Name
2. Materials Needed
3. What this mod will do
4. Instructions
Ill Start Off
Note: This mod only works on Stock aluminum bolts W/ Venturis
1. Venturi Bolt Mod
2. Long Nosed Plyers
3. Increase Air flow through the bolt
4. -First you want to remove the bolt from the gun
-Second you want to look into the bolt at the strange star shaped venturi
-You then take your long nosed plyers and grab a hold of the venturi very tightly
- Start to unscrew the venturi
- Voila! A bolt w/ out a useless piece of metal in it
--------------------------------------------------------------------------------------------------------
1. Sanded Down Bolt
2. Dremel/Sander
3. Prevent Chopping A little
4.- When you look at the end of the stock aluminum spyder bolt it is a little sharp around the edges
- This could result in some barrel chops
- You wanna take the dremel/ sander and just sand down the edges of the bolt so that they are a little rounded
Thats it for now, post some of your favorite mods
