heres how you set it up to reach its max for ur individual setup

SON – Step 1: c*ck the gun and shoot to see if the sear releases. Do this 10 times
Step 2: If sear releases all 10 times, then lower son by 1, and repeat step 1.
Step 3: Keep repeating step 2 until sear doesn’t release all 10 times, and up the son by 1. This is you minimal son time

CDEL – Step 1: Start with the setting at 3.
Step 2: Put plastic bag over the feedneck, leave some slack.
Step 3: Shoot the gun, and check to see if it is sucking the plastic down, or blowing it up.
Step 4: If it is sucking up, leave the setting alone. But if it is blowing, keep raising the setting 1 at a time, and repeat steps 2-3 until you get suction.

CON – Step 1: Put a ball in the feedneck
Step 2: Have setting at 40
Step 3: If ball drops then lower settings by 2, and keep lowering until the ball doesn’t drop in. Then at this setting, raise it by 2.
Step 4: if ball doesn’t drop in, keep raising the setting by 2 until the ball does drop in.
Step 5: test settings 10 times, if ball doesn’t drop in all 10 times, raise the setting by 1.

CTO – I would just leave this alone.

COFF – we will be looking at con while adjusting coff
Step 1: leave coff at 30 for now
Step 2: turn out ivg, until it is flush with the body.
Step 3: put con setting at 25
Step 4: shoot marker
Step 5: if the gun cocks, test it 10 times to see if it cocks all 10 times
Step 6: if it did c*ck all 10 times, then lower con setting by 2 and repeat step 5 until the gun doesn’t c*ck all 10 times, and then raise con setting by 2. This con setting will be your coff setting. Put back your con settings to what you had it before
Step 7: if your gun didn’t c*ck all 10 times, then raise it by 2, and repeat step 5 until the gun cocks all 10 times. This will be your coff setting, and put back your con settings to what you had it before