Join Date: Aug 2005
Location: Florida
Posts: 102
|
Quote
To start things off.... heres the setup from the wrath t-board manual
SETUP
The setup modes are broken into individual settings, Dwell, Debounce, etc. When you first enter the setting, it will NOT be changed. This is so you can go to the next setting without having to re-enter your setting. Once you pull the trigger once, the setting will be reset to its minimum. Every trigger pull after that will increment the setting a defined about. You can go to the next setting by clicking the upper button once. You can exit the setup mode by clicking the power button once. The setting after the last setting in SETUP1 is the first of SETUP2. The ON/OFF type settings (Eye Mode, Valve Disable, Valve Mode) alternate with trigger pulls, the LED will turn ON (setting Enabled) or OFF (setting Disabled). If you have an open bolt marker (i.e. TES, Black Dragun, T1, etc.), the T-Board will ignore all Close Bolt marker settings as long as you have DISABLED the Valve setting.
Definitions:
Dwell time the solenoid or electropnuematic valve is engaged.
Eye Delay delay from when the trigger is pulled to when the marker actually fires.
Debounce time the board waits for the trigger to stop bouncing. Low debounce will double fire.
Eye Disable Time time the trigger must be held in to disable the eye.
Eye Mode type of eye installed, Break or Bounce beam. If no eye is installed, set to Breakbeam.
Eye Installed if an eye is installed Enable, if not Disable. For Close Bolt markers only
Valve disables the 3-way front valve; OFF for NO VALVE, ON for VALVE.
Valve Mode Adjustable – valve is on for a set period of time (Valve Dwell)
Classic – valve is on as long as the trigger is pulled (like mechanical markers)
Valve Delay time from pull of trigger to engaging of front valve (3-way)
Valve Dwell time the valve is engaged. For Close Bolt markers only
Eye Valve Delay amount of time board waits before checking eye. For Close Bolt markers only
SETUP1 Default Min (OFF) Max (ON) Increments
Dwell 5ms 2ms 100ms 1ms
Eye Delay 20ms 1ms 100ms 5ms
Debounce 5ms 1ms 100ms 1ms
EyeOff Tme 2sec .25sec 20sec .25sec
Eye Mode Break Break Bounce Brea/Boun
SETUP2
Eye Installed Off Off On ON/OFF
Valve Off Off On ON/OFF
Valve Mode Classic Classic Adjust Adj/Class
Valve Delay 15ms 2ms 100ms 1ms
Valve Dwell 30ms 20ms 100ms 1ms
ValveEyeDelay 30ms 20ms 100s 1ms
Example1: (TES, T1, ONE, Wrath, etc.)
Turn on the marker with Button1 held down until the LED blinks once,
release Button1.
Pull trigger three times (Dwell: 2+1+1ms), click Button1 (next setting),
click Button1 (next setting, Eye Delay unchanged),
pull trigger four times (Debounce: 1+1+1+1ms), click Button1 (next setting),
click Button1 (next setting, Eye Disable unchanged),
pull trigger once (Breakbeam, LED OFF),
click Button2 (exit Setup mode).
Marker is ready for play for an Open bolt marker with a 4ms Dwell, an unchanged Eye Delay, a 4ms Debounce, an unchanged Eye Disable, and Breakbeam eyes. All setting in SETUP2 will remain unchanged.
Example2: (Dragunfly, Drallion)
Turn on the marker with Button1 held down until the LED blinks once, release Button1.
Pull trigger four times (Dwell: 2+1+1+1ms), click Button1 (next setting),
click Button1 (next setting, Eye Delay unchanged),
pull trigger once (Debounce: 1ms), click Button1 (next setting),
pull trigger twice (Eye Disable: 0.25+0.25 sec), click Button1 (next setting),
pull trigger until LED is ON (Bouncebeam, LED ON), click Button1 (next setting),
pull trigger until LED is ON (Eye Installed), click Button1 (next setting),
pull trigger until LED is ON (Valve: ON), click Button1 (next setting),
pull trigger until LED is OFF (Valve Mode: Classic), click Button1 (next setting),
pull trigger five times (Valve Delay: 2+1+1+1+1ms), click Button1 (next setting),
pull trigger five times (Valve Eye Delay: 20+1+1+1+1ms),
click Button2 (exit Setup mode).
Marker is ready for play for a Closed Bolt Marker with a 5ms Dwell, an unchanged Eye Delay, a 1ms Debounce, a .5 sec Eye Disable, Bouncebeam eyes, Eyes installed, Front Valve in On, Classic valve mode, 6ms Valve Delay, an unchanged Valve Dwell, and a 25ms Valve Eye Delay.
|